Kinect driver on TI DM8168

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Kinect driver on TI DM8168

jasonlee
This post has NOT been accepted by the mailing list yet.
I have one kinect, and it is connected into  a USB port of TI8168, I get the follow information :

...
usb 2-1.3:1.0: USB hub found
usb 2-1.3:1.0: 3 ports detected
usb 2-1.3.2: new full speed USB device using musb-hdrc and address 121
usb 2-1.3.2: device not accepting address 121, error -71
usb 2-1.3.2: new full speed USB device using musb-hdrc and address 122
usb 2-1.3.2: device not accepting address 122, error -71
usb 2-1.3.2: new full speed USB device using musb-hdrc and address 123
usb 2-1.3.2: device not accepting address 123, error -71
usb 2-1.3.2: device descriptor read/64, error -71
...

I have check the error info. -71, it is 'protocol error' in kernel's note.


The kinect can work normally on Windows and Linux OS on PC x86 platform, and the USB driver of Linux OS on the TI8168 platform is also correct( the normal USB carema and USB mice work very well )

I don't know why, Could someone give me some suggestions?